After using plastic floor for a period of time, there will be scratch or bulge problems. Many plastic floor boards can't be repaired after being worn. For example, the pur surface of plastic floor surface can't be repaired. Some problems can be repaired. Here's how to repair scratch of plastic floor.
The repair of floor tile scratch adopts floor tile repair agent to repair the tile scratch. Use a brush to dip in the repair agent to trace the crack of the scratch. After 30 minutes, paint and trace it again. After drying, repeat it again until there is reflection at the scratch from the side. This treatment can keep the scratch clean for a long time; In addition, the deep scratch on the brick surface can also be polished by water mill, but it should be polished carefully, otherwise there will be pits or greater damage to the brick surface, such as dull and wider scratches.
局部破壞的修復方式則需要先將需更換的地板破壞掉，然后徹 底取出。用工具將要更換的地板短邊處鑿出一個縫隙，再用鋸將需更換的地板表面鋸開;然后將分成小片的地板取出，但一定要保證不破壞周圍的地板;然后將拆下的地板周圍的膠水清理干凈，并保證清理好的榫槽便于安裝，如果清理不徹 底，接縫會不平或不嚴?？梢杂糜行麻绢^小片地板在接口上來回滑動，找出殘留膠跡并清除，以保證修復后的地板美觀。
The repair method of local damage needs to destroy the floor to be replaced first, and then take it out completely. Chisel a gap at the short edge of the floor to be replaced with a tool, and then saw the surface of the floor to be replaced with a saw; Then take out the floor which is divided into small pieces, but make sure not to damage the surrounding floor; Then clean the glue around the removed floor, and ensure that the cleaned mortise is easy to install. If the cleaning is not complete, the joint will be uneven or not tight. A new tenon piece of floor can be used to slide back and forth on the interface to find out the residual glue and remove it, so as to ensure the aesthetic appearance of the repaired floor.